Just fill in the form below, click submit, you will get the price list, and we will contact you within one working day. Please also feel free to contact us via email or phone. (* is required).

mullite ceramic components fabrication in italy

  • Mullite Plate, Silicate Ceramic Plate | Advanced Ceramic ...

    2019-4-1 · The alumina particles were dispersed in phenoxyethanol (POE, Sigma Aldrich, Italy) before the liquid RC 711 was added. The ratio between RC 711 and Al 2 O 3 was determined from the molar composition of mullite and the ceramic yield of RC 711 in air, and was adjusted with XRD characterisation for the micrometre-sized alumina mixture to develop mullite without a SiO 2 …

    Get Price
  • Complex mullite structures fabricated via digital light ...

    2006-1-1 · Alumina–mullite ceramics (e.g. AM2 composition) with a uniform microcrystalline structure and a low content of a glassy phase are the most promising for armour applications due to a high level of ballistic performance and lower density (3.52–3.56 g/cm 3 versus 3.8–3.9 g/cm 3 inherent to high alumina ceramics).

    Get Price
  • Alumina–mullite ceramics for structural applications ...

    2015-10-28 · Custom Fabricated Ceramic Component. AC Technologies, Inc., an advanced ceramics company, offers 'off the shelf' standard Alumina & Mullite Tubing, Machinable Ceramics & Magnesia Ceramics. Our Custom Ceramic Fabrication facilities include Design & Application Services to meet the varied needs of industry, research & academia.

    Get Price
  • Custom Fabricated Ceramic Components from AC

    2009-11-15 · 1.. IntroductionMullite is well-known as superior engineering ceramic material owing to its relatively high chemical stability, good refractory properties, high temperature mechanical strength and low thermal expansion coefficient , .Fabrication of continuous mullite nanofibers is highly desired because it is an important candidate used as reinforcement of metals, ceramics …

    Get Price
  • Fabrication and characterization of electrospun mullite ...

    2021-6-2 · In this study, porous mullite ceramics were prepared by gel-casting using fused mullite particles as the raw materials, ρ-Al2O3 and polysilicon waste as the binders, and starch as the pore forming agent. In addition, the effects of pore forming agent content on the apparent porosity, compressive strength, pore size distribution, thermal analysis, and pressure drop of porous …

    Get Price
  • Preparation of porous mullite ceramic for high temperature ...

    2015-12-1 · The tailoring/fabrication methods of mullite foams belong to common foaming techniques such as partial sintering, the usage of sacrificial fugitives, replica templates or in situ foaming. Recently the most frequently reported method is the pore formation using partial sintering process of synthetised or commercial powders [4] , [14] , [15 ...

    Get Price
  • Mullite-based refractories fabricated by foam casting ...

    2012-3-14 · For ceramic samples obtained from powders after milling and synthesis in a reactor using illite clay as a binder the following were determined as a function of the temperature regime during spark plasma sintering: development of crystal phases (mullite, pseudocubic zirconium dioxide, and zircon), microstructure, linear shrinkage, apparent density, and compression strength.

    Get Price
  • Properties of mullite-zirconium ceramic obtained by spark ...

    2020-5-25 · The fabrication of ceramic components can be achieved via several techniques. In general, ceramic components can be configured in a variety of geometries including hollow fibers, tubes, and flat discs. Furthermore, ceramic components can be processed in four different stages such as material preparation, processing, sintering and finishing.

    Get Price
  • Mullite Rod, Silicate Ceramic Rod Supplier | Advanced ...

    mullite by interaction with silicone resins, pyrolized in air, as silica precursors22), did not compromise the shaping into highly porous foams, by frothing. The approach was later extended to the fabrication of three-dimensional scaffolds, by direct …

    Get Price
  • Highly porous mullite ceramics from engineered alkali ...

    2015-10-28 · Custom Fabricated Ceramic Component. AC Technologies, Inc., an advanced ceramics company, offers 'off the shelf' standard Alumina & Mullite Tubing, Machinable Ceramics & Magnesia Ceramics. Our Custom Ceramic Fabrication facilities include Design & Application Services to meet the varied needs of industry, research & academia.

    Get Price
  • Custom Fabricated Ceramic Components from AC

    University of Padova Department Industrial Engineering, Padova, Italy. Associate Editors ... AlF 3-Assisted Flux Growth of Mullite Whiskers and their Application in Fabrication of Porous Mullite-alumina Monoliths. ... The Journal of the European Ceramic Society publishes the results of original research and reviews relating to ceramic ...

    Get Price
  • Open Ceramics | Journal | ScienceDirect.com by Elsevier

    2019-6-28 · Kyocera presents its full scope of ceramic components in UK. One of the internationally leading ceramic manufacturers, which recently grew its presence in Europe by acquiring a ceramic production in Germany, will demonstrate its full range of ceramic products at Ceramics UK which is taking place on July 10th and 11th, 2019 in Telford, UK.

    Get Price
  • Kyocera presents its full scope of ceramic components in ...

    McDanel Advanced Ceramic Technologies LLC is a leader in developing and manufacturing the highest quality ceramic tubes and ceramic components. Because of our core focus on ceramic technologies, McDanel is uniquely positioned to provide you with superior products and dedicated service for an unparalleled range of applications.

    Get Price
  • McDanel Advanced Ceramic Technologies – Ceramic Tubes ...

    2021-6-2 · CoorsTek is the global leader in technical ceramics. With over 50 locations worldwide, manufactures advanced ceramic components for virtually every industry.

    Get Price
  • CoorsTek | Global Leader in Engineered Technical Ceramics

    2015-10-28 · Custom Fabricated Ceramic Component. As the source for many advanced ceramics, AC Technologies traditionally services a market of high tech customers including semiconductor, aerospace, medical & academic accounts. All extruded product quality & process control. All finished goods traceable to raw material lot.

    Get Price
  • Custom Fabricated Ceramic Components from AC

    Advanced Ceramic Technology produces high quality industrial ceramic components. Our goal is to exceed the expectations of our customers by providing excellent customer service throughout the entire process: from the initial request for quote to the on-time delivery of ceramic parts that have been expertly machined to the dimensions specified.

    Get Price
  • Mullite Rod, Silicate Ceramic Rod Supplier | Advanced ...

    mullite by interaction with silicone resins, pyrolized in air, as silica precursors22), did not compromise the shaping into highly porous foams, by frothing. The approach was later extended to the fabrication of three-dimensional scaffolds, by direct …

    Get Price
  • Highly porous mullite ceramics from engineered alkali ...

    Italy: Browse through 61 potential providers in the components, ceramic industry on Europages, a worldwide B2B sourcing platform.

    Get Price
  • Components, ceramic Italy | Europages

    2020-7-2 · Buyers guide of finished ceramic and glass components for design engineers and purchasers. Professional services and ceramic associations are also included. ... mullite, cordierite, alumina, MgO, forsterite, high-purity materials in MgO... Read More. Add to RFP . Keith Co. ... Custom fabrication and distributor of fused quartz products and labware.

    Get Price
  • Ceramic Components Directory - Ceramic Industry

    2021-5-25 · SAM Mullite products include various shapes available for purchase. We also have significant capabilities for producing custom engineered Mullite products.

    Get Price
  • Mullite Ceramic Rod Supplier | Stanford Advanced Materials

    2021-4-27 · Cermet. Compound materials composed mainly of TiC or TiN and NbC, with metals such as Co, Ni or Mo. With excellent wear resistance, cermet has less adhesion to metal and is widely used for cutting tools, wear-resistant tools in electronics manufacturing and sliding parts. It can also be brazed with metal. More Information.

    Get Price
  • Special Ceramics | Fine Ceramic Components | Products ...

    2019-4-10 · Shaping of Ceramic Components by Pressure Filtration. Structural Ceramics Produced Through Post-Sintering of Dynamically Compacted Powder. Viscous Deformation of Glass Ceramics in Barium Aluminosilicates. Preparation of SiC Slip and Fabrication of SiC Components by Slip Casting. Injection Molding of SiC(w)/Si 3 N 4 Composite Turbine Blade ...

    Get Price
  • Ceramic Materials and Components for Engines | Ceramic ...

    Additive manufacturing (AM) is the fabrication of real three-dimensional objects from metals, ceramics, or plastics by adding material, usually as layers. There are several variants of AM; among them material extrusion (ME) is one of the most versatile and …

    Get Price
  • Additive Manufacturing of Metallic and Ceramic

    For instance, (mercaptopropyl)methylsiloxane mixed with vinylmethoxysiloxane yields low-density SiOC components with high strength and excellent stability at high temperatures in air. 23 Additive manufacturing techniques for fabricating complex ceramic components . . .

    Get Price
  • (PDF) Additive Manufacturing techniques for fabricating ...

    2018-9-25 · 11 Advanced Design and Fabrication of Microwave Components Based on Shape Optimization and 3D Ceramic Stereolithography Process N. Delhote 1, S. Bila 1, D. Baillargeat 1, T Chartier 2 and S Verdeyme 1 1XLIM, UMR 6172, Université de Limoges/CNRS 2SPCTS UMR 6638, Université de Limoges/CNRS Limoges,

    Get Price
  • PROCESSING OF MULLITE AND MULLITE-BASED CERAMIC

    2019-9-20 · mullite precursor KAD. However, sample W was found adverse in this chemical processing route, being associated to the presence of amorphous iron oxide. Addition of alumin ium oxide was an alternative for the fabrication of mullite [1,13-15]. A powdered alumina (99 wt % Al 2O 3) with particle size < 63 µm, 66 wt %, was selected.

    Get Price
  • Fabrication of Al 2 O 3 –Mullite–AlN Multiphase Ceramic ...

    2015-1-20 · Abstract: This paper proposes a novel method to manufacture ceramic insulated metal substrate for power semiconductor modules and high-temperature electronics. α-Al 2 O 3-mullite (Al 6 Si 2 O 13)-AlN multiphase ceramic layer was fabricated on W80Cu20/Cr substrate at 1050 °C by firing.The polycarbosilaneAlN green ceramic layer was synthesized by spin processor, and …

    Get Price
  • Minerals | Free Full-Text | Mullite-Based Ceramics from ...

    Mullite (3Al2O3·2SiO2) is an aluminosilicate characterized by excellent physical properties, which makes it an important ceramic material. In this way, ceramics based on mullite find applications in different technological fields as refractory material (metallurgy, glass, ceramics, etc.), matrix in composite materials for high temperature applications, substrate in multilayer packaging ...

    Get Price
  • Highly porous mullite ceramics from engineered alkali ...

    2017-11-8 · Figure 2 confirms the nature of the adopted filler, effectively consisting of γ-Al 2 O 3 (PDF#49-0134). This phase remains clearly detectable in the geopolymer composite, after curing, along with minor traces of quartz (PDF#87-2096), attributed to impurities in the metakaolin, and paragonite (NaAl 2 (Si 3 Al)O 10 (OH) 2, PDF#87-0091).The latter phase is known to form upon …

    Get Price
  • Mullite Ceramic Rod Supplier | Stanford Advanced Materials

    2021-5-25 · SAM Mullite products include various shapes available for purchase. We also have significant capabilities for producing custom engineered Mullite products.

    Get Price
  • Technology Offers in CERAMICS - EEN Bayern Innovativ

    2006-3-30 · - ceramic foams of high purity materials like alumina and mullite - ceramic foams with well controlled cell sizes ranging from 100µm to 5mm (25 to 5 ppi (pores per inch)): the cell size can be adjusted to the real needs of the application - ceramic foams with high mechanical strength: the mechanical strength is a multiple of the

    Get Price
  • Joining of SiC, alumina, and mullite by the Refractory ...

    SiC, alumina, and mullite are stable materials for high-tem-perature applications, with a unique combination of properties such as lightweight, high-temperature stability, and chemical inertness. They are used increasingly in components for energy production, defense, space and many other high-performance

    Get Price
  • Mullite Sand Chamotte Sand As Refractory Material For ...

    Mullite sand, a aluminate-silicate refractory, is commonly used in precision casting. Refractoriness is around 1750 degrees. The higher the aluminum content in Molai sand, the lower the iron content. The smaller the dust, the better the quality of Molai sand products. Mullite sand is produced by sintering kaolin at high temperature.

    Get Price
  • Advanced Ceramics from Preceramic Polymers Modified at the ...

    2014-3-7 · for the shrinkage associated with the ceramic conversion of polymers. Solid particles and the in situ reaction with the filler reduce the amount of gas generated and the local gas pressure in the part, respectively, therefore enabling the fabrication of near-net shape, bulk, uncracked ceramic components [7].

    Get Price
  • Home [cof.com.au]

    2021-1-14 · Ceramic Oxide Fabricators manufacture and distribute advanced ceramic components for abrasion, corrosion, and electrical resistance, laboratory ware, and thermocouple sheaths and insulators by processes of extrusion, injection moulding, casting, welding and machining of alumina and other ceramics. Manufacturers of SIRO2 zirconia based oxygen sensors.

    Get Price
  • Highly porous mullite ceramics from engineered alkali ...

    2017-11-8 · Figure 2 confirms the nature of the adopted filler, effectively consisting of γ-Al 2 O 3 (PDF#49-0134). This phase remains clearly detectable in the geopolymer composite, after curing, along with minor traces of quartz (PDF#87-2096), attributed to impurities in the metakaolin, and paragonite (NaAl 2 (Si 3 Al)O 10 (OH) 2, PDF#87-0091).The latter phase is known to form upon …

    Get Price
  • Fabrication of Al 2 O 3 –Mullite–AlN Multiphase Ceramic ...

    2015-1-20 · Abstract: This paper proposes a novel method to manufacture ceramic insulated metal substrate for power semiconductor modules and high-temperature electronics. α-Al 2 O 3-mullite (Al 6 Si 2 O 13)-AlN multiphase ceramic layer was fabricated on W80Cu20/Cr substrate at 1050 °C by firing.The polycarbosilaneAlN green ceramic layer was synthesized by spin processor, and …

    Get Price
  • Fused Deposition of Ceramics (FDC) and Composites

    the FDM. The PP binder system was mixed with ceramic powders and then extruded in the form of filament for the FDC. Controlled porosity ceramic parts were directly fabricated using a FDM 1650 machine with mullite, fused silica and titania powder loaded green filaments. The parts were then binder removed and sintered.

    Get Price
  • Ceramco Inc. - Ceramic Industry

    2017-10-16 · Alumina, zirconia, mullite and refractory ceramics. Vertically integrated with low- and high-pressure injection molding for fast, inexpensive prototyping and easy transition to production volume. Alumina, zirconia, mullite and refractory ceramics. ... Buyers guide of finished ceramic and glass components for design engineers and purchasers ...

    Get Price
  • Ceramic Fabrication Services Specifications | Engineering360

    2021-6-12 · Mullite (3Al 2 O 3-2Si0 2 or Al 6 Si 2 O 13) is a compound of aluminum, silicon and oxygen. Mullite can also be viewed as a phase in the alumina-silica binary system. Mullite is a synthetic, fused or calcined crystalline aluminum silicate produced in electric arc furnaces from alumina and silica. Mullite usually has an off-white or tan color.

    Get Price
  • Technology Offers in CERAMICS - EEN Bayern Innovativ

    2006-3-30 · - ceramic foams of high purity materials like alumina and mullite - ceramic foams with well controlled cell sizes ranging from 100µm to 5mm (25 to 5 ppi (pores per inch)): the cell size can be adjusted to the real needs of the application - ceramic foams with high mechanical strength: the mechanical strength is a multiple of the

    Get Price
  • Metal & Dielectric Deposition Components | CoorsTek ...

    2018-1-11 · Mullite suspensions for reticulate ceramic preparation. Journal of the American Ceramic Society , 2000 , 83 ( 12 ): 2993 - 2998 . [本文引用:2] [JCR: 2.107]

    Get Price
  • Advanced Design and Fabrication of Microwave

    Chemical reactions inside the chamber deposit thin layers of metallic, dielectric, or semiconductive material onto the wafers. Chamber lids and liners are exposed to plasma during deposition or etch processes — requiring a combination of high plasma durability, purity, and dielectric strength. High-purity alumina (Al 2 O 3) and aluminum ...

    Get Price
  • Mullite Plate, Silicate Ceramic Plate | Advanced Ceramic ...

    Mullite Plate Description. Mullite plate is made of silicate ceramic. The main crystal phase of the mullite plate is 3Al2O3·2SiO2. It has low thermal expansion, good mechanical strength, and resilience at elevated temperatures. Raw mullite materials are …

    Get Price
  • Complex mullite structures fabricated via digital light ...

    2019-4-1 · The alumina particles were dispersed in phenoxyethanol (POE, Sigma Aldrich, Italy) before the liquid RC 711 was added. The ratio between RC 711 and Al 2 O 3 was determined from the molar composition of mullite and the ceramic yield of RC 711 in air, and was adjusted with XRD characterisation for the micrometre-sized alumina mixture to develop mullite without a SiO 2 …

    Get Price
  • Alumina–mullite ceramics for structural applications ...

    2006-1-1 · Alumina–mullite ceramics (e.g. AM2 composition) with a uniform microcrystalline structure and a low content of a glassy phase are the most promising for armour applications due to a high level of ballistic performance and lower density (3.52–3.56 g/cm 3 versus 3.8–3.9 g/cm 3 inherent to high alumina ceramics).

    Get Price
  • Custom Fabricated Ceramic Components from AC

    2015-10-28 · Custom Fabricated Ceramic Component. AC Technologies, Inc., an advanced ceramics company, offers 'off the shelf' standard Alumina & Mullite Tubing, Machinable Ceramics & Magnesia Ceramics. Our Custom Ceramic Fabrication facilities include Design & Application Services to meet the varied needs of industry, research & academia.

    Get Price
  • Fabrication and characterization of electrospun mullite ...

    2009-11-15 · 1.. IntroductionMullite is well-known as superior engineering ceramic material owing to its relatively high chemical stability, good refractory properties, high temperature mechanical strength and low thermal expansion coefficient , .Fabrication of continuous mullite nanofibers is highly desired because it is an important candidate used as reinforcement of metals, ceramics …

    Get Price
  • Preparation of porous mullite ceramic for high temperature ...

    2021-6-2 · In this study, porous mullite ceramics were prepared by gel-casting using fused mullite particles as the raw materials, ρ-Al2O3 and polysilicon waste as the binders, and starch as the pore forming agent. In addition, the effects of pore forming agent content on the apparent porosity, compressive strength, pore size distribution, thermal analysis, and pressure drop of porous mullite …

    Get Price
  • Mullite-based refractories fabricated by foam casting ...

    2015-12-1 · The tailoring/fabrication methods of mullite foams belong to common foaming techniques such as partial sintering, the usage of sacrificial fugitives, replica templates or in situ foaming. Recently the most frequently reported method is the pore formation using partial sintering process of synthetised or commercial powders [4] , [14] , [15 ...

    Get Price
  • Properties of mullite-zirconium ceramic obtained by spark ...

    2012-3-14 · For ceramic samples obtained from powders after milling and synthesis in a reactor using illite clay as a binder the following were determined as a function of the temperature regime during spark plasma sintering: development of crystal phases (mullite, pseudocubic zirconium dioxide, and zircon), microstructure, linear shrinkage, apparent density, and compression strength.

    Get Price
  • Fabrication of ceramic components with hierarchical ...

    2010-6-26 · This article reviews different methodologies for the fabrication of monolithic ceramic components possessing multiscale porosity, i.e., with pores ranging from a few nanometers to several hundred microns. Two main strategies have been discussed: (a) the assembling of micro/mesoporous materials into components possessing also macropores; (b) the addition of …

    Get Price
  • Advanced ceramic components: Materials, fabrication, and ...

    2020-5-25 · The fabrication of ceramic components can be achieved via several techniques. In general, ceramic components can be configured in a variety of geometries including hollow fibers, tubes, and flat discs. Furthermore, ceramic components can be processed in four different stages such as material preparation, processing, sintering and finishing.

    Get Price
  • Welcome to Goodfellow Ceramic and Glass Division

    2021-6-30 · Materials. S ince 1947, we have been a precision machining and polishing fabricator of parts from all technical ceramics, sapphire, glass and quartz. We machine these materials to very precise tolerances (many times measured in millionths of an inch) for dimension, flatness, wedge and roundness or cylindricity.

    Get Price
  • Materials - Insaco Inc.

    2021-5-14 · Cermet. Compound materials composed mainly of TiC or TiN and NbC, with metals such as Co, Ni or Mo. With excellent wear resistance, cermet has less adhesion to metal and is widely used for cutting tools, wear-resistant tools in electronics manufacturing and sliding parts. It can also be brazed with metal. More Information.

    Get Price
  • Special Ceramics | Fina keramiska komponenter | Produkter ...

    2002-6-12 · laboratory exercises are discussed in this paper: 1) the formulation and fabrication of triaxial porcelains, and 2) the processing and characterization of glasses. As the name suggests, triaxial porcelains contain three components, clay, feldspar and flint.

    Get Price
  • Laboratory Experiences in Glasses and Traditional Ceramics

    2021-6-30 · KEMET helps their customers build a better tomorrow with the broadest selection of capacitor technologies in the industry, along with an expanding range of electromechanical devices, electromagnetic compatibility solutions and supercapacitors.

    Get Price
  • KEMET

    This Small Business Innovation Research Phase I project will develop an innovative and versatile low-pressure injection molding (LPIM) process for the fabrication of net-shape ceramic components. LPIM has been recently recognized as an attractive process for the fabrication of high-precision, complex-geometry ceramic parts.

    Get Price
  • 3D Printers | WASP | Leading Company in the 3d printing ...

    2016-11-29 · This paper describes a novel extrusion-based additive manufacturing process that has been developed to enable embedment of sensors in ceramic components during the part fabrication. In this process, an aqueous paste of ceramic particles with a very low amount of binder content (< 1 vol%) is extruded through a moving nozzle to build the part ...

    Get Price
  • Development of a Versatile Low-Pressure Injection Molding ...

    25th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures - B : Ceramic Engineering and Science Proceedings Mrityunjay. Singh Nettressurs · Engelsk · 2009 · Electronic books.

    Get Price
  • Mullite | CoorsTek

    The information provided on this chart is for general material property reference only. The customer should recognize that exact properties of materials may vary according to product configuration but close control of values of most properties can be maintained, if specified. Nothing herein is provided, or is to be construed, as absolute engineering data or constituting a warranty or ...

    Get Price
  • McDanel Advanced Ceramic Technologies LLC

    2020-7-2 · Manufacturer of high-temperature, high-purity, corrosion-resistant ceramic components. Material selections include alumina, mullite, zirconia and sialon. ... Engineering, Custom Fabrication. Machining. Back to Listings. Ceramic Industry Magazine. May 2019.

    Get Price
  • Boron Nitride Tube, BN Tube Supplier | Advanced Ceramic ...

    2018-12-13 · • Thin sheets of green ceramic cast as flexible tape from “slip” • Used for integrated circuits and capacitors and other flat components • Slip = suspended ceramic particles + liquid carrier (contains binders, plasticizers) Fig. 13.18, Callister & Rethwisch 8e. Particulate forming #3: Tape casting: Ceramic Fabrication Methods (ii)

    Get Price
  • Chapter 13: Applications and Processing of Ceramics

    High-Strength Fracture- andWear-Resistant ZirconiaCeramic Sheets. Thanks to the addition of yttria, these zirconia ceramic sheets resist cracking and shrinking under force even when pushed together. If they do crack, they won’t shatter and the fracture won’t grow.

    Get Price
  • Ceramic Bar Stock | McMaster-Carr

    Ceramic integration and additive manufacturing technologies increasingly enable fabrication and utilization of components for high temperature structural applications, including those in energy, environment, transportation, and aerospace. Joining processes allow combination of simpler parts to form large structures or complicated shapes.

    Get Price
  • G13: Ceramic Additive Manufacturing and Integration ...

    2020-8-6 · Keywords: experiment; fabrication; coal fly ash; kaolin; refractory; sinter; sample 1. Introduction Mullite, cordierite, and kyanite materials are well-known compounds made of magnesium, aluminum, and silicate oxides. They have unique properties with advantages for a wide range of applications in ceramic and refractory industries [1–6].

    Get Price
  • Fabrication of Refractory Materials from Coal Fly Ash ...

    Scanning Electron Microscopy (SEM) of a CMC piece. A Ceramic Matrix Composite (CMC) is a ceramic matrix coupled with embedded ceramic fibers. This unique association of materials revolutionized the aerospace industry, making parts more resistant to extreme conditions and lighter compared to the previous technologies.CMC materials prevail over most of the drawbacks …

    Get Price
  • CMC - Ceramic Matrix Composite | Definition & properties ...

    2018-6-16 · ceramic conversion. Here, it is shown that this goal can be achieved through an appropriate engineering of both the material and the printing process, enabling the fabrication of preceramic 3D shapes and their transformation into dense and crack-free SiOC ceramic components with highly complex, 3D sub-micrometer architectures.

    Get Price
  • 3D Nanofabrication of SiOC Ceramic Structures

    2019-5-30 · Journal of the European Ceramic Society, 2017, 37(15): 4491-4496. Li-Xiang Wu, Wei-Ming Guo, Jing-Xi Li, Shang-Hua Wu, Hua-Tay Lin. Si 3 N 4-ZrB 2 ceramics prepared at low temperature with improved mechanical properties . Journal of the European Ceramic

    Get Price